Fire alarm project for a fuel and lubricants warehouse

In this section, the fire alarm and notification systems are installed in the premises of the building "Pumping station of the fuel and lubricants warehouse".
This section develops a fire alarm system for the premises of the building "Pumping station of the fuel and lubricants warehouse":
• oil pumping station;
• diesel fuel pumping station;
• oil warehouse in containers;
• filter regeneration;
• electrical panel.
The fire alarm system of the fuel and lubricants warehouse allows:
• timely detection of the source of fire;
• generation of a fire signal and transmission to the Orion automated workplace with duplication to the CS dispatcher;
• activation of the notification system;
• shutdown of the process equipment.
The building is equipped with a type 1 notification system in accordance with NPB104-03.
Probable sources of fire are - electrical wiring, faulty electrical equipment.
In accordance with NPB88-2001, NPB104-03, the following shall be installed in the building:

• IP103-4/1-70-IB thermal fire detectors in the diesel fuel pump room, included in the intrinsically safe circuit of the BIV unit of the UPKOP135-1-1 device, connected to the Signal-20P control panel according to a diagram that allows recognizing the operation of two sensors in the intrinsically safe circuit;
• IP 212-ZSU smoke fire detectors in other rooms, except for the foam concentrate warehouse;
• manual fire alarms with safety signs on the outer wall of the building;
• a light and sound alarm on the outer wall of the building and sound alarms inside.

File format: dwg, tif (AutoCAD 2010 not editable)
Note: source files in *.tif format must be in the same folder with the project file *.dwg

Download file "Fire alarm project for fuel and lubricants warehouse" >>>

Tags: gas compressor station, fuel and lubricants warehouse