Content: CODMW_22-M4-logitech.zip (4.44 KB)
Uploaded: 10.11.2022

Positive responses: 0
Negative responses: 0

Sold: 1
Refunds: 0

$14.46
Universal script - "No recoil" for Logitech mice in Call of duty modern warfare 2022 removes most of the vertical recoil for the M4, significantly improving accuracy and thereby increasing the effective range against opponents. Your mouse should be supported by the Logitech Gaming Software, or GHUB software.

The script was written for the M4 without attachments, with a 60-round magazine, and under the following in-game mouse sensitivity settings — 15, and FOV — 120 (In the script lines: percentChangeX = 0 and percentChangeY = 0).

The degree of recoil reduction is adjustable in the following script lines (the numbers represent percentages):

percentChangeX = 0 (horizontal)
percentChangeY = 0 (vertical)

For example, if: percentChangeX = 100 and percentChangeY = 100, then you need to adjust your in-game mouse sensitivity to 7.5, and FOV to 120.

If you need a different sensitivity or have a different LOADOUT, different FOV, you need to find your values for (percentChangeX and percentChangeY).

If the crosshair moves downwards or to the right during shooting, the values should be negative. If it moves upwards or to the left, the values should be positive.

FOV — 100, Sensitivity — 8:
FSS COVERT V + Tune (weight: -1.40 oz, length: +1.00 in)
11.5 T-H4 BARREL + Tune (weight: -0.50 lb, length: -0.40 in)
FSS OLE-V LASER + Tune (weight: +0.50 oz, zeroing distance: -51.00 ft)
DF105 REFLEX SIGHT + Tune (weight: +3.00 oz, eye position: -2.25 in)
5.56 HIGH VELOCITY + Tune (weight: -0.70 g, load: +9.00 gr)

percentChangeX = 30
percentChangeY = 50

FOV — 100, Sensitivity — 8:
FSS COVERT V + Tune (weight: -1.40 oz, length: +1.00 in)
11.5 T-H4 BARREL + Tune (weight: -0.50 lb, length: -0.40 in)
FSS OLE-V LASER + Tune (weight: +0.50 oz, zeroing distance: -51.00 ft)
JR582 HYBRID SIGHT + Tune (weight: +3.00 oz, eye position: -0.75 in)
5.56 HIGH VELOCITY + Tune (weight: -0.70 g, load: +9.00 gr)

Holographic sight:
percentChangeX = 70
percentChangeY = 90

4.8x magnifier:
percentChangeX2 = 130
percentChangeY2 = 150


If your in-game mouse sensitivity settings are too high or too low for you, you can change your mouse DPI; it won´t affect the script.


"CapsLock" - toggles the script on/off. Press the CapsLock key on your keyboard, and the CapsLock indicator will light up, indicating that the script is activated. Press the CapsLock key again to turn off the script, and the CapsLock indicator will turn off.

"Mouse button 5" - enables recoil reduction using these lines: percentChangeX2 and percentChangeY2. These lines are used when you have a hybrid sight. Switch to high magnification and press mouse button 5.

If you have a G304, G305, G602, G603, G604, or a similar mouse that cannot be connected via wire and if your scripts are not working stably on it, it is better to sell such a mouse and buy yourself any wired Logitech mouse to use the scripts properly.

If you have a G600 mouse, you should use only the GHUB program.

It is recommended to run the Logitech Gaming Software or GHUB with administrator privileges.

Sometimes, GHUB may glitch, causing the scripts to stop working, and in such cases, it needs to be reinstalled.

Third-party programs that can use the mouse´s side buttons, such as Discord, may cause issues with running the scripts, so keep this in mind.

Using profiles for games in GHUB and Logitech Gaming Software is not recommended due to potential anticheat issues. It is better to use a desktop profile with the persistent attribute.

If you have a large number of profiles, script interruptions may occur. This means that at some point, recoil reduction may not work.

You should also be familiar with the button numbering on the mouse.

In newer versions of GHUB, various problems may arise. If you cannot resolve issues in the newer GHUB versions, it is advisable to download an older version of GHUB from the link: https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view

After installing the older version of GHUB, make sure to disable the "Enable Automatic Updates" option in the program settings.
No feedback yet

Similar items